ΔΙΚΑΙΟΛΟΓΗΤΙΚΑ ΧΡΗΣΗΣ ΓΗΣ ΣΕ ΓΗΠΕΔΑ ΕΝΤΟΣ ΟΙΚΙΣΜΟΥ

  1.  Αίτηση
  2. Αντίγραφο οικισμού 1:5000 με τα εξής:
    1. Θέση γηπέδου
    2. Κύκλο με ακτίνα 1000μ
    3. Σημείωση εντός της περιμέτρου του κύκλου των χαρακτηριστικών θέσεων και κτισμάτων.
    4. Δήλωση μηχανικού ώς εξής:
 ΥΠΕΥΘΥΝΗ ΔΗΛΩΣΗ ΜΗΧΑΝΙΚΟΥ
Ο ΚΑΤΩΘΙ ΥΠΟΓΡΑΜΜΕΝΟΣ ΠΟΛΙΤΙΚΟΣ ΜΗΧΑΝΙΚΟΣ ΜΑΥΡΙΔΗΣ ΠΑΝΑΓΙΩΤΗΣ, ΔΗΛΩΝΩ ΟΤΙ ΕΝΤΟΣ ΑΚΤΙΝΑΣ 1000Μ ΑΠΟ ΤΗΝ ΥΠΟ ΑΔΕΙΟΔΟΤΗΣΗ ΔΡΑΣΤΗΡΙΟΤΗΤΑ ΙΔΙΟΚΤΗΣΙΑΣ _ _ _ _ _ _ _ _ _ _ _ _ _ _:
-ΥΦΙΣΤΑΤΑΙ ΣΧΕΔΙΟ ΠΟΛΕΩΣ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ΣΕ ΑΠΟΣΤΑΣΗ _ _ _ _Μ ΠΕΡΙΠΟΥ
-ΔΕΝ ΥΦΙΣΤΑΤΑΙ ΖΟΕ,
-ΔΕΝ ΥΦΙΣΤΑΤΑΙ Γ.Π.Σ. ΚΑΙ
-ΔΕΝ ΥΦΙΣΤΑΤΑΙ ΛΑΤΟΜΙΚΗ-ΜΕΤΑΛΛΕΥΤΙΚΗ ΠΕΡΙΟΧΗ
-ΔΕΝ ΥΦΙΣΤΑΤΑΙ ΠΕΡΙΟΧΗ NATURA
-ΤΜΗΜΑ ΤΗΣ ΙΔΙΟΚΤΗΣΙΑΣ ΒΡΙΣΚΕΤΑΙ ΕΝΤΟΣ ΤΟΥ ΟΙΚΙΣΜΟΥ "_  _ _ _ _ _ _ _ _ _ _", ΤΜΗΜΑ _ _' (_ _ _ _Μ2) ΚΑΙ ΤΜΗΜΑ ΤΗΣ ΕΚΤΟΣ(_ _ _ _Μ2).
Ο ΔΗΛΩΝ ΜΗΧΑΝΙΚΟΣ

Etabs steel frame serviceability check error.

Found it very interesting to calculate the factors taken under consideration by the software, while checking the vertical deflections in steel frame members. Here they are:
Dead load scale factor: 1.3-1.5
Live load scale factor: 1.8-3.3

In order to check the results, a single story, one bay steel building has been designed. L/B/H=8.00/8.00/3.00m Beam sections IPE240, Column sections HEB300, slab h=20cm with stiffness modifier 0.50.

The results given from the steel frame design of the beams:
-for Dead Load 19.2mm, instead of 14.3mm (ScF=19.2/14.3=1.34)
-for Live Load 44.8mm, instead of  14.0mm (ScF=44.8/14.0=3.2)
-for ADL, δ=5.6mm, so for for Super DL+Live Load 50.2mm, instead of 5.6+14.0=19.6mm

Until now, couldn't find the reason for this. Any comment appreciated.


Results from serviceability check

Deflection for Live Load

Deflection for Dead (self weight) Load

Deflection for Additional Dead Load



How to design unreinforced masonry wall with Etabs

Since there is no module in Etabs to design or check unreinforced masonry walls, a workaround is presented here. The results will be compared to an equal frame element.
The wall dimensions that will be designed are as follows:
Length L=5.00m
Height H=3.00m
Width (thickness) t=25cm
In order to compare shell element results with